![]() ![]() Able to log from Innovate Motorsports 2. Combined with the EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Mitsubishi vehicles, and support for other cars is in.Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector.Standalone datalogs to microSD / microSDHC card without a laptop.J2534 PassThru support with Windows DLL.USB 2.0 full speed device (USB-A/Mini cable included).All 3 reflash adapters are also included with the interface. For Mitsubishi, you’ll need the adapter for most pre CAN vehicles which include the 5-9 Evo. To capacitor C8, soldered a ceramic capacitor of 10 uF. In sum in order to replacing the resistors on the Tactrix Openport 2.0 Clone, you can do the following: 1). Butpin 53 output 10k pull-up connection points. But in pulled up to the plus through a 10k resistor from C12. ![]() For Subaru you’ll only need a reflash adapter for the 2001 through 2005 WRX, but not STi. LM-ke for output 1 and 3 electrolyte 100×25. We include a USB cable with each OpenPort, which is all the hardware you’ll need unless you have one of the few vehicles that require a separate reflash adapter. Combined with Tactrix EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. The OpenPort 2.0 is the newest tuning hardware from Tactrix that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |